MP DRY CABINET IS A DRYING CABINET DEVELOPED TO MEET ALL CUSTOMER‘S REQUIREMENTS FOR STORAGE OF THEIR PCBs AND MSD COMPONENTS WITH AN OUTSTANDING PERFORMANCE / COST RATIO.

Advantages

Low relative humidity

Very low relative humidity under 0.5%RH together with powerful heating, which enables drying temperature up to 60°C for ST series (40°C for LT series), are ideal for storing of your PCBs and all MSD level components without any need of repacking in a MBB bag.

Short drying time

The combination of a low relative humidity and high drying temperature means a significant reduction of the time required for effective drying of all stored components or PBCs. With MP DRY CABINET ST the drying time for MSD Level 3 components, with a body thickness of 1.4mm, is reduced down from 120 hours to 18 hours* (at 1%RH and 60°C).

*Compared to the competitions typical standard of only 2%RH and 40°C

Manufactured according to IPC standards

MP Dry Cabinets are manufactured according to IPC/ JEDEC J-STD 033C and IPCS-1601 standards.

Measuring of real relative humidity values

The sensor position in all our drying cabinets is in the highest possible point in the cabinet. Dry air is much heavier than moist air and therefore our sensor position guarantees the most realistic internal air humidity values.

Low energy consumption

MP DRY CABINET ST series feature very effective 30mm insulation as a standard (45 mm/60 mm optional) and dithermal metalized glass (no risk of operator burns, even when the cabinet is set to maximum temperature) to ensure maximum energy saving and low running cost.

ESD safe

All our drying cabinets from MP DRY CABINET ST series are made of high quality stainless steel, LT series feature ESD safe powder coating (RAL7016), and therefore meet all ESD regulations. All our cabinets are equipped with an ESD grounding point (Ø 10 mm).

ROTRONIC sensor

Each drying cabinet is equipped very accurate sensor from swiss company ROTRONIC. Each sensor is factory calibrated and comes with a calibration protocol. Of course we offer a on-site calibration of the sensor. Or simply send us your sensor for calibration and we will provide you with another one for this period of time.

Traceability

Each MP DRY CABINET is equipped with a datalogger with internal memory for storing of internal temperature and relative humidity values in real time. Simultaneously is every door opening and its duration monitored and stored. All these data are downloadable via Ethernet (option for LT series) or USB memory stick as a standard.

Software

DryCabinet SW - shows the relative humidity and the temperature of a chosen cabinet in a time graph. Also shows the number of door openings for each day and average values for temperature and RH. Tool for statistic print out or export for chosen time period. Real-time connection of the cabinet via Ethernet or data transfer via USB.

DryTrace SW for storage management of carriers and PCBs inside the drying cabinet. The user is informed what is in which cabinet and where the materials are in a specific cabinet by using names and color codes for each shelf and shelving compartment. There is also the expiry time for each component being shown and how long it will take, under current conditions to dry out completely.
- Data input via 1D / 2D scanner
- Material library for easy identification
- User defined MSL level and current dry cabinet settings (temperature + humidity)
- Alarm for expired components
- Quantity can be manually added
- Scanner for locations outside of the cabinet is also possible

DRYTrace Library Import SW
Simple utility to import customer‘s componet library in .csv format into DryTrace SW library.

Email client for DryTrace
With this option emails with prewarnings and warnings regarding expired materials will be sent out.

RFID SW
This software is a combination of our DRY CABINET SW (on-line graphical display of temperature and humidity inside of the cabinet + count of door openings) and a cabinet equipped with electromagnetic locks and a RFID reader.
Operator has to scan his/her RFID/Magnetic card to get access to the cabinet. The operator will have the possibility to open only the door(s), which are assigned to his/her card, all other doors remain locked.
The details about time, duration and operator‘s name are collected and can be shown.
The only real time Access Control System on the market

Models

Independent chambers system

  • each chamber is thermally and hermatically separated
  • each chamber is equipped with its own drying unit, sensor and touch screen control panel
  • different parameters can be set up in every chamber separately
  • data from each chamber are tracked via LAN or USB separately
  • electromagnetic lock for each chamber with its own time parameters possible

2 CHAMBERS

HORIZONTALLY SEPARATED FOR
MP DRYCABINET II ST/LT

2 CHAMBERS

2 CHAMBERS

VERTICALLY SEPARATED FOR
MP DRYCABINET IV ST/LT

2 CHAMBERS

4 CHAMBERS

SEPARATED FOR
MP DRYCABINET IV ST/LT

4 CHAMBERS

Parameters MP DRY CABINET

MP DRY CABINET ST MP DRY CABINET LT
RFID ACCESS Optional accessory Optional accessory
FULL STAINLESS STEEL BODY Yes No
FULL ESD BODY - RAL 7016 No Yes
MECHANICAL DOOR LOCK Optional accessory Optional accessory
ELECTROMAGNETIC DOOR LOCK (TIMER/PASSWORD PROTECTED) Optional accessory Optional accessory
RADIAL FAN Yes Yes
SLIDE-OUT SHELVES (MAX. 35 KG) Optional accessory Optional accessory
SLIDE-OUT SHELVES (MAX. 50 KG) Optional accessory Optional accessory
ADJUSTABLE HEATING UP TO 70 °C Optional accessory No
ADJUSTABLE HEATING UP TO 60 °C Yes No
ADJUSTABLE HEATING UP TO 40 °C No Optional accessory
DRYING UNIT MPDRY 5 Yes Yes
ROTRONIC SENSOR +/- 0,8 % RH, 0.1 K Yes Yes
ESD-SAFE DESIGN Yes Yes
FULLY GRAPHICAL TOUCH DISPLAY - IDEC Yes Yes
LAN NETWORK CONNECTION Yes Optional accessory
USB CONNECTOR Yes Yes
ADDITIONAL DRY UNIT MPDRY 5 (FOR II + IV) Optional accessory Optional accessory
INTEGRATED DATALOGGER - user configurable Yes Yes
HEIGHT-ADJUSTABLE LEGS Yes Yes
ESD WHEELS Yes Yes
CONFIGURABLE ACOUSTIC ALARM
open door alarm, time defined by user alarm for nonfunctional drying unit
Yes Yes
DITHERMAL METAL COATED GLASS Yes No
INTERIOR LED ILLUMINATION Optional accessory Optional accessory
STATUS LIGHT Optional accessory Optional accessory
ROTRONIC SENSOR HPS 0.5 % RH, 0.1K Optional accessory Optional accessory
Optional accessory Optional accessory
  • TOUCH
    DISPLAY

  • ROTRONIC
    SENSOR

  • ETHERNET

  • USB PORT

  • DOUBLE GLASS

  • ESD
    GROUNDING POINT

Distributors

Czech / Slovak Republic + ROW

MP Elektronik Technologie, s.r.o.
Dlouhá 219
678 01 Blansko – Klepačov

Denmark

INTERFLUX DANMARK ApS
Stenbro Allé 8
6650 Brørup



Tel. +45 75 38 39 22
interflux@interflux.dk
www.interflux.dk

Finland + Baltic states

EKVAL OY
Järvihaantie 1
01800 Klaukkala



Tel. +358 10 436 0203
ilkka.valimaa@ekval.fi
www.ekval.fi

France

Lintech
Z.A de Courtaboeuf
1 avenue de Norvège
91140 VILLEBON / YVETTE



Orion Industry
16 Chemin de la Guy
91160 Ballainvilliers
France



Tel: (+33)(0) 1 64 86 70 90
info@lintech.fr
www.lintech.fr




Tel: +33 1 69 34 53 11
info@orion-industry.com
www.orion-industry.com

Germany

Geltron GmbH
Luitgardstr. 14-18
75177 Pforzheim



Nemotronic
Im Geiersching 15a
D-76863 Herxheim



Tel: +49 (7231) 443 1330
sales@geltron.de
www.geltron.de



Tel: +49 (7276) 965 998-0
info@nemotronic.de
www.nemotronic.de

Poland

Scanditron Poland
UL. OBYWATELSKA 115
94-104, LODZ



Tel: +48 42 686 02 46
info@scanditron.pl
www.scanditron.pl

Portugal / Spain

ProMasTech Lda
Rua dos Tractores nº506
Edificio C - 2870-607
Alto Estanqueiro MONTIJO

Sweden / Norway

ESD-Center AB
Ringugnsgatan 8,
216 16 Malmö,
Sweden



Tel: +46 (0)8 500 664 66
info@esd-center.se
www.esd-center.se

UK

KPE Ltd
33 The Clarendon Centre,
Dairy Meadow Lane,
Salisbury, Wilts, SP1 2TJ



Tel: +44 (0)2380 454 675
info@kpeltd.co.uk
www.kpeltd.co.uk

USA / CANADA

A-Tek Systems Group
410 S Sunset St,
Longmont, CO 80501



Tel: +1 (970) 532-5100
patty@atekllc.com
www.atekllc.com

Romania / Bulgaria / Macedonia

Danutek Balkans SRL
Calea Martirilor 1989 No.1 corp E
300724 Timisoara
Romania



Office tel: +40 356 802 800
Email: office@danutek.com

Hungary / Ukraine

Danutek Hungary Kft
1116, Budapest,
Barázda út 42.
Hungary



Tel: +36 1 273 04 57
E-mail: sales@danutek.com
Web: www.danutek.com

Contact us